Collection: Magigoo Glide – Fast, Even Adhesive Application

Fast, even Magigoo application for large build plates

Prepare one large plate—or several plates in succession—with a reusable roller that spreads a thin, even layer of Magigoo.

Choose the complete kit for your first setup, the roller if you already have suitable adhesive, or the 250ml Original refill for continued use.

Magigoo Glide roller spreading adhesive across a large build plate

Choose your Glide setup

Magigoo Glide complete kit with roller, 250ml Original and cleaning cloth

Complete Glide Kit

Roller, 250ml Magigoo Original and cleaning cloth. Best for your first Glide setup.

Glide Roller Only

Reusable applicator for buyers who already have suitable Magigoo adhesive.

Magigoo Glide Original 250ml refill bottle

250ml Original Refill

Large refill for continued PLA, ABS, ASA, PETG, TPU and HIPS printing.

Faster preparation
Cover large or multiple plates more efficiently.

Thin, even coverage
Spread a consistent film across the active print area.

Controlled use
A few drops go a long way when spread with the roller.

Water-cleanable
Clean the cooled plate, roller and supplied cloth with water.

Made for large beds and repeat preparation.
Glide gives workshops, schools and print farms a reusable way to spread a thin, even layer across one large plate or several plates in succession.

Apply in four steps

Shake and dispense Magigoo Glide Original on a cool build plate — **1. Shake and dispense**
Open the cap and add a few drops to a clean, cool plate.

Spread Magigoo with the Glide roller — **2. Spread**
Create a thin, even layer. The roller does not need to spin.

Print on the Magigoo-coated build plate — **3. Print**
Use the appropriate material and bed-temperature settings.

Clean the cooled build plate with water — **4. Cool and clean**
Remove the cooled part, then clean the plate and roller with water.

Magigoo Original starting temperatures

Use these manufacturer bed-temperature ranges as a starting point. Confirm the exact filament, build surface and current product instructions before a long print.

Material	Bed temperature
PLA	40–60°C
ABS	90–110°C
PET-G	60–90°C
TPU	40–80°C
HIPS	90–110°C

Care and storage: Apply on a clean, cool build plate. After the plate cools, clean with water. Store the bottle and roller upright with the cap closed and away from direct sunlight.